Amazon FBA Shipping from China to USA: The 2026 Landed Cost and Who Files What
Amazon FBA shipping from China to USA puts a $15 unit on a fulfilment-centre floor at $22.67 to $24.12 in November 2026, and the surprise is where the money goes: duty takes 25% to 27% of landed cost while freight and drayage take 2.9% to 9.1%. Sellers watch the rate index; the bill is decided elsewhere.
What follows is paperwork and duty, not the sailing schedule. The freight side sits in shipping from China to the USA. Drewry put Shanghai–Los Angeles at $7,416 per 40ft on 12 November 2026 while the combined Section 301 load stayed at 37.5% to 42.5% with MFN. If you read one part, read the one on who the importer of record is: a rule published on 6 November 2026 changes who may file from 5 January 2027.

Duty is a quarter of your landed cost, freight is a rounding error
The same unit lands at $22.67 to $24.12 by LCL, $22.92 to $24.12 in a 20ft holding 12 CBM, and $25.03 to $27.22 by air.
Duty on 600 units is $3,645. The entire ocean LCL leg is $190 to $330. The duty line runs 11 to 19 times the freight line, and rate shopping cannot touch it, because it is a percentage of customs value rather than a price anyone quotes.
The index is falling anyway: Drewry's composite lost 2% to $4,305 per 40ft in the week to 12 November 2026 and the duty stack did not move a point. The number a seller watches and the number a seller pays keep drifting apart.
Who files what, and the date each filing closes
Seven steps stand between a supplier's dock and an Amazon receiving door, and each one fails closed. Miss the ISF and the penalty is $5,000 to $10,000 before anyone has opened a carton.
Step | Filing or document | When it closes | Who signs |
|---|---|---|---|
1 | Commercial invoice, packing list, 10-digit HTS code per line | Before the booking is confirmed | You or your supplier |
2 | ISF (10+2) filing, China to USA | 24 hours before the vessel loads | Your broker |
3 | Entry Type 11 to $2,500, Type 01 above, plus continuous bond | At or before arrival | The importer of record |
4 | U.S. IOR status declaration on CBP Form 3461 and 7501 | With the entry | Importer or broker as IOR |
5 | Examination, release, any partner agency hold | 1 to 5 days after arrival | CBP |
6 | Drayage and the FC delivery appointment | Inside Amazon's window | Carrier or 3PL |
7 | Amazon inbound placement fee | 45 days after receipt | Amazon, on units received |
The ISF is due 24 hours before loading, not arrival, so a booking confirmed late in the week can put the deadline ahead of the paperwork. Goods up to $2,500 may clear informally on Type 11; above that the file needs a Type 01 entry and a continuous bond. Entry Type 86 is gone, so a $5 sample needs an entry and a broker.
The 2026 tariff stack on a consumer SKU
Duty on Chinese consumer goods in November 2026 is three layers: the MFN rate that belongs to the HTS code, the original Section 301 rate, and the 12.5% forced-labour Section 301 that took effect on 24 July 2026 and stacks rather than replacing anything. The ledgers below assume 3.0% MFN, typical of chapters 39, 42, 63, 73 and 85; looking up the right HS code is where a rate stops being an assumption.
Tariff layer | Rate | Basis |
|---|---|---|
MFN on the HTS code | 3.0% assumed | Confirm code by code |
Section 301, original action | 25% | List 4A goods sit at 7.5% |
Section 301, forced labour | 12.5% | From 24 July 2026, stacking |
Combined Section 301 load | 37.5% | 25% plus 12.5% |
Total duty on this SKU | 40.5% | 3.0% MFN plus 37.5% |
Section 232, where it applies | 50% steel, 25% chips | Chips since 15 January 2026 |
Print 7.5% and stop, as plenty of pages still do, and the duty line is $2,970 light, about a fifth of the landed total. The 37.5% to 42.5% band with MFN is the honest range for manufactured goods.
Amazon discontinued its US FBA prep service on 1 January 2026
Amazon discontinued its US FBA prep service on 1 January 2026, and every shipment created after that date arrives in whatever state the supplier left it. The shutdown covers all inventory entering US FBA: direct-to-FBA, AWD, AGL, SEND and the Supply Chain Portal. Shipments created before 1 January 2026 keep the service.
The penalty is not a delay. Amazon's notice on the FBA Prep Service says shipments created after 1 January that arrive without proper prep and item labelling are not eligible for reimbursement if damaged or untraceable.
The retired price list is the benchmark: $0.55 a label, $0.70 a bag, $1.00 an opaque bag, $1.25 bag plus label, up to $2.55 oversize.
Prep moved to the factory, and it is cheapest there
Factory labelling in China costs $0.05 to $0.15 a unit for an FNSKU. A US prep centre charges a median $1.30, the middle 50% between $0.99 and $1.66 across 44 centres surveyed in June 2026. On 600 units the difference is $504 to $966; on 3,600 units, $3,024 to $5,796. On a $13,600 landed base that is a 4% to 7% swing, larger than the whole ocean line.
The saving only exists if the work happens before the cartons leave China. Consolidating in Shenzhen or Ningbo, applying FNSKUs and palletising to Amazon's dimensions is what our Amazon FBA shipping service does at origin, which is why the prep line in the ledgers reads $30 to $90.
FBA carton and pallet requirements, US store | Limit |
|---|---|
Carton size and weight | 36 × 25 × 25 in, 50 lb total |
Minimum carton | 6 × 4 × 1 in, at least 1 lb |
Pallet footprint | 40 × 48 in, 4-way access, GMA B or better |
Pallet height and weight | 72 in including the pallet, 1,500 lb total |
Unit bag | 1.5 mil transparent, suffocation warning from 5 in |
Drop test | Survive a 3-foot drop |
The rest of the spec is what gets shipments refused: one scannable barcode per unit, every other barcode covered, label flat and never round a corner, and cut- and puncture-resistant packaging for sharp items since April 2025. Non-compliant packaging may be refused or disposed of at your expense, so audit the first carton.
Who is the importer of record, and the rule that lands on 5 January 2027
Amazon will not act as an importer of record, consignee or partner agency agent for any shipment. You, or an entity you appoint, are the importer; Amazon is only the ultimate consignee. The bond behind the role is $50,000, or 10% of the duties, taxes and fees paid in the previous twelve months, whichever is greater.
Then came 6 November 2026. CBP published an interim final rule, 91 FR 69977, under Executive Order 14411 and a new 19 CFR part 110, effective 5 January 2027. A foreign importer of record may not make entry for consumption unless it is CTPAT-validated (today only Canadian importers qualify) or designates a CTPAT-validated licensed broker to make entry or act as IOR. A licensed broker on its own is no longer enough. Brokers must keep the evidence five years and be compliant by 6 May 2027.
The definition kills the usual workaround. A US importer of record must be organised under US law and located in the US while maintaining either 51% of beneficial owners who are US citizens or lawful permanent residents and who control it, or direct ownership of a significant amount of unencumbered US real property. A nominee-managed shell LLC does not survive that test.
Enforcement is already running. Since 18 September 2026, under 91 FR 53627, CBP voids importer numbers whose Form 5106 data is incomplete, with no cure period, and the physical address must be the actual business location rather than a registered agent, broker or post office box. The power of attorney must run directly from importer to broker under 19 CFR 111.36(c)(3).
Our US customs clearance team files these entries daily, and the CBP announcement is worth reading before you sign a power of attorney.
"DDP to FBA": what the quote actually transfers
In a classic DDP arrangement the forwarder's broker files as importer, so the entry number belongs to someone else. What you do not hold afterwards is your own 5106 number, your own continuous bond, the right to protest a liquidation or file a Post Summary Correction, standing to claim duty drawback under 19 U.S.C. 1313, and any independent proof of the duty paid.
Four things to ask for on every DDP quote: the entry number, the CBP Form 7501, the duty paid on that entry, and the names of the importer of record and the broker. A forwarder who cannot produce all four is selling a price, not a customs position; our guide to how DDP shipping from China works covers the mechanics.
Landed cost, three ways
Every line below runs off the same inputs. General consumer goods at FOB $15.00 a unit; 600 units at 300 kg and 2 CBM for LCL and air; 3,600 units at 12 CBM for the 20ft. MFN 3.0% assumed, Section 301 25%, forced-labour 301 12.5%, total 40.5%. Duty on customs value as declared, no freight added. MPF 0.3464% with the FY2027 floor of $34.58 and cap of $670.86; HMF 0.125%, ocean only. Rates are the September and October 2026 house baseline: LCL $95 to $165 a CBM, 20ft USWC $4,400 to $6,600, air $5.00 to $6.80 a kg. Computed lines are arithmetic on those inputs; the rest are assumptions.
Scenario A, LCL, 2 CBM, 600 units | Low | High | Basis |
|---|---|---|---|
Goods, FOB 600 units at $15 | $9,000 | $9,000 | assumption |
Origin pickup, export declaration, documents | $150 | $250 | assumption |
Ocean LCL, 2 CBM | $190 | $330 | house |
Destination CFS and terminal handling | $60 | $110 | assumption |
Drayage and delivery to the FC | $150 | $300 | assumption |
ISF (10+2) filing | $35 | $75 | broker |
Customs entry and broker fee | $125 | $300 | house |
MPF 0.3464% floored, HMF 0.125% | $46 | $46 | computed |
Duty at 40.5% | $3,645 | $3,645 | computed |
Prep and FNSKU at the factory | $30 | $90 | $0.05–0.15/unit |
Inbound placement fee, minimal splits | $144 | $300 | $0.24–0.50/unit |
FC delivery appointment | $25 | $25 | 3PL rate |
Landed total | $13,600 | $14,471 | computed |
Per unit | $22.67 | $24.12 | 1.51× to 1.61× FOB |
Goods are 62% to 66% of that total, duty 25% to 27%, freight and drayage 2.9% to 5.1%.
Scenario B, 20ft FCL, 12 CBM, 3,600 units | Low | High | Basis |
|---|---|---|---|
Goods, FOB 3,600 units at $15 | $54,000 | $54,000 | assumption |
Origin pickup, export declaration, documents | $250 | $450 | assumption |
Ocean freight, 20ft USWC | $4,400 | $6,600 | house |
Drayage, LA and Long Beach | $525 | $925 | all-in |
ISF (10+2) filing | $35 | $75 | broker |
Customs entry and broker fee | $125 | $300 | house |
MPF 0.3464% and HMF 0.125% | $255 | $255 | computed |
Duty at 40.5% | $21,870 | $21,870 | computed |
Prep and FNSKU at the factory | $180 | $540 | $0.05–0.15/unit |
Inbound placement fee, minimal splits | $864 | $1,800 | $0.24–0.50/unit |
FC delivery appointment | $25 | $25 | 3PL rate |
Landed total | $82,529 | $86,840 | computed |
Per unit | $22.92 | $24.12 | 1.53× to 1.61× FOB |
Goods are 62% to 65%, duty 25% to 26%, freight with drayage 6% to 9% — a full ocean bill spread over 12 CBM.
Scenario C, air, 2 CBM, 600 units | Low | High | Basis |
|---|---|---|---|
Goods, FOB 600 units at $15 | $9,000 | $9,000 | assumption |
Origin handling and export documents | $120 | $220 | assumption |
Air freight, 333 kg chargeable | $1,665 | $2,267 | $5.00 to $6.80 a kg |
Airport handling, AWB and security | $80 | $150 | assumption |
Pickup, LAX to the FC | $150 | $300 | assumption |
Customs entry and broker | $125 | $300 | house |
MPF 0.3464% floored, no ISF or HMF by air | $35 | $35 | computed |
Duty at 40.5% | $3,645 | $3,645 | computed |
Prep and FNSKU at the factory | $30 | $90 | $0.05–0.15/unit |
Inbound placement fee, minimal splits | $144 | $300 | $0.24–0.50/unit |
FC delivery appointment | $25 | $25 | 3PL rate |
Landed total | $15,019 | $16,332 | computed |
Per unit | $25.03 | $27.22 | 1.67× to 1.81× FOB |
Air costs $1,419 to $1,861 more than LCL, 10% to 13% of landed cost for 12 to 18 days saved port to port.
Benchmark, November 2026 | Rate |
|---|---|
FBA shipping cost from China to USA per kg, air | $5.00 to $6.80 a kg |
LCL vs FCL break even, CBM, 2026 | 20 to 63 CBM |
One price still circulates that cannot be true: a 40ft shipped "all-in DDP" for $1,900 to $3,200. The ocean leg alone was $7,416 on 12 November 2026 and duty on a $54,000 container is $21,870, so ocean plus duty is $29,286 before a terminal fee.
The LCL/FCL crossover is 20–63 CBM, not 12–18
LCL is $485 of fixed cost a shipment plus $125 to $220 a CBM, which at 2 CBM reproduces the $735 to $1,390 in the first ledger. A 20ft is $5,360 to $8,375 all-in, and none of that shrinks when you load less: 12 CBM in a 20ft costs $5,360 to $8,375 for cargo that would have been $1,985 to $3,590 as LCL. The box sails 57% empty.
The crossover is two divisions. The cheapest 20ft beats LCL once LCL's top band is in play: (5,360 − 950) ÷ 220 = 20.0 CBM. LCL's cheapest configuration stays under the dearest 20ft until (8,375 − 485) ÷ 125 = 63.1 CBM. Between 20 and 63 the answer depends on the quotes in front of you; outside that band it does not.
Book 12 CBM into a $4,400 to $6,600 box this quarter and you pay $366 to $550 for every cubic metre you loaded.
Amazon Global Logistics vs a forwarder: what SEND actually sells
AGL is door-to-door ocean and air from China and Vietnam into FBA or AWD, with destination clearance inside the price — but onboarding step four is "set up your importer of record". SEND is a carrier marketplace across 14 countries. Neither one is an importer. Prep, the importer of record and duty all stay with you.
The placement fee, costed as a decision
Since 15 January 2026 the placement fee is charged 45 days after receipt, on quantities actually received, and its size depends on how many fulfilment centres you accept. Minimal splits, generally one location, run $0.14 to $1.90 a unit for standard size; at 600 units in the 12 oz to 1.5 lb band that is $144 to $300.
Amazon FBA inbound placement fee 2026, standard size, minimal splits | Per unit |
|---|---|
Small standard, 8 oz or less | $0.14 to $0.32 |
Large standard, 12 oz or less | $0.20 to $0.40 |
Large standard, 12 oz to 1.5 lb | $0.24 to $0.50 |
Large standard, 1.5 to 3 lb | $0.34 to $0.60 |
Large standard, 15 to 20 lb | $0.55 to $1.90 |
Extra-Large products | no placement fee |
Amazon-optimized splits cost nothing if you can send five or more identical cartons per item to five or more locations, but the price is four extra outbound legs. Break-even is $36 to $75 per additional shipment: below that you split, above it you pay the fee. Amazon Managed Placement removes it another way, at a flat per-shipment rate capped at 2,000 cartons per 40ft and 1,000 per 20ft.
The defect fee is a separate charge of $0.32 to $5.72 a unit, and it is what a refused inbound costs: the wrong FC on the label, a missing FNSKU, a pallet outside 40 × 48 in or over 1,500 lb, or no appointment. Storage keeps billing while it sits, the return leg is yours, and a shipment created after 1 January 2026 that arrives unprepped is not reimbursable if damaged or untraceable.
Peak timing that survives contact with reality
All six Q4 2026 arrival deadlines have passed: 14 October for AWD, 21 October for minimal splits, 28 October for optimized splits, ahead of Black Friday Week. No FBA deadline has been published for Christmas 2026, so what is left of the year is a fee window.
Window | What changes | Amount |
|---|---|---|
FBA peak season fees, holiday fulfilment | 15 October 2026 to 14 January 2027 | +$0.32 a unit on average |
Fuel and logistics surcharge | introduced April 2026, unchanged for 2027 | 3.5% on the MCF rate card, on top of peak |
2027 fee changes | 15 January 2027 | +$0.19 a unit on average |
Christmas 2026 FBA arrival | not published on 16 November 2026 | plan to a 3PL instead |
Work backwards. Take the arrival date you need, subtract a 7 to 14 day receiving buffer, subtract 22 to 30 days door-to-door for a west coast port, then subtract booking lead time. Run it back from Chinese New Year on 6 February 2027: production that must clear before the holiday books in the first half of January.
Amazon FBA shipping from China to USA: questions sellers ask
Does Amazon still label my products for me when they arrive in the US?
No. Amazon ended prep and item labelling for US FBA on 1 January 2026, covering direct-to-FBA, AWD, AGL, SEND and the Supply Chain Portal. Only shipments created before that date keep it.
Who is the importer of record on my FBA shipment, me or Amazon?
You, always. Amazon will not act as importer of record, consignee or partner agency agent for any shipment. From 5 January 2027 a foreign importer of record also needs CTPAT validation or a validated broker.
In DDP shipping to FBA, who pays the duty and whose name is on the customs entry?
The forwarder's broker files and pays, so the entry carries the forwarder's importer number rather than yours. Ask for the entry number, the Form 7501, the duty paid, and the names of the importer and the broker.
How much duty will I actually pay on a China-made product in 2026?
Between 37.5% and 42.5% of declared value for most consumer goods: MFN at 2.5% to 6%, Section 301 at 25% or 7.5%, and the 12.5% forced-labour 301 from 24 July 2026 stacked on top. Section 232 applies over that for steel, aluminium and chips.
Why did my landed cost rise while the ocean rate fell?
Because freight is a small share of the total and duty is not. Freight and drayage are 2.9% to 5.1% of the 2 CBM ledger while duty is 25% to 27%, so a 2% weekly fall in the index moves the landed number by a tenth of a point.
What does the Amazon inbound placement fee cost, and can I avoid it?
$0.14 to $1.90 a unit for standard size on minimal splits, charged 45 days after receipt. Amazon-optimized splits carry no fee if you can send five or more identical cartons per item to five or more locations, and the cost moves into four extra legs.
Can I still get stock into FBA in time for Black Friday 2026?
Not through FBA inbound. The 14, 21 and 28 October arrival deadlines have passed, no Christmas deadline has been published, and peak fees run to 14 January 2027. What is left is air into a 3PL with Multi-Channel Fulfilment.
Is it cheaper to prep at the factory in China or at a prep centre in the US?
The factory, by a wide margin: $0.05 to $0.15 a unit against a US median of $1.30, which is $504 to $966 on 600 units. The risk is execution, so audit a sample carton before the container loads.
Send your SKU list and the HTS code, get a landed-cost quote back
Send three things — the SKU list with units, the HTS code or a product description good enough to classify, and the destination fulfilment centre — and you get a landed-cost sheet back with the same lines as the ledgers above, at the duty rate your code actually carries.